Skip to content
ADVANCED FIRE PROTECTION

Firestop and Fire Protection Products

TENMAT’s new line of intumescent products for through-penetration firestopping systems are UL classified and designed to fireproof wire, pipe, and cable penetrations in walls or ceilings. All TENMAT fire rated penetration products are easy to install and allow for retroactive installations or new construction.

TENMAT is your one-stop-shop for all your passive fire protection solutions.

TENMAT Fire Protection Plugs is a UL classified intumescent plug firestop and can be easily cut to pass wires, pipes, or cables through them. Ideal for smaller round openings of up to 4”. No mechanical fixing necessary.

TENMAT Fire Protection Blocks can be stacked and cut to fire rate wall penetrations. FF260 firestop blocks are designed to be stacked and cover larger penetrations, such as cable tray openings, etc. FF260 is made of a soft and flexible intumescent material which allows for easy retroactive installation of cables or pipes in openings up to 384 in² with a max. dimension of 32””.

TENMAT Fire Protection Foam is a UL classified two-component intumescent firestop foam that can be used in combination with the FF260 Blocks or FF160 Plugs to seal wall and ceiling openings. FF360 is suitable for irregular or hard-to-access openings and can also be used as a single product solution.

TENMAT Fire Protection Sealant helps properly fire rate membrane penetrations in walls and ceilings. The FF365 firestop sealant is suitable for irregular, hard-to-access, and small penetrations and can be used in combination with other TENMAT products such as the FF260 Blocks, the FF160 Plugs and the FF130E Recessed Light Cover series.

TENMAT Fire Protection Plugs is a UL classified intumescent firestop plug and can be easily cut to pass wires, pipes, or cables through them. Ideal for smaller round openings of up to 4”. No mechanical fixing necessary.

TENMAT Fire Protection Blocks can be stacked and cut to fire rate wall penetrations. FF260 firestop blocks are designed to be stacked and cover larger penetrations, such as cable tray openings, etc. FF260 is made of a soft and flexible intumescent material which allows for easy retroactive installation of cables or pipes in openings up to 384 in² with a max. dimension of 32””.

TENMAT Fire Protection Foam is a UL classified two-component intumescent firestop foam that can be used in combination with the FF260 Blocks or FF160 Plugs to seal wall and ceiling openings. FF360 is suitable for irregular or hard-to-access openings and can also be used as a single product solution.

TENMAT Fire Protection Sealant helps properly fire rate membrane penetrations in walls and ceilings. The FF365 firestop sealant is suitable for irregular, hard-to-access, and small penetrations and can be used in combination with other TENMAT products such as the FF260 Blocks, the FF160 Plugs and the FF130E Recessed Light Cover series.